The FLIR Systems Inc ThermaCam SC1000/ PM390/ PM290/ PM190 is the ultimate portable high definition infrared imaging and temperature measurement system available on the market. With its compact design and the versatility of this device you will be getting your work done a lot faster than before. You can program it specifically for your application and the environment you will be using it in for the best results possible.The UltraCam thermal microscope infrared camera represents the state of the art in close up macro/microscope thermal imaging technology. The ability to perform thermal infrared microscopy is extremely rare and the FLIR UltraCam 390 thermal microscope is the pinnacle of this technology.
can you buy dapoxetine in the us CALL TODAY for pricing! (702) 369-3966.
http://bigmountainwestusasa.com/gallery/img_4493/ The FLIR Systems Inc ThermaCam SC1000/ PM390/ PM290/ PM190 is an industry leader for High Definition IR imaging and temperature measurement systems. The SC1000 Scientific Thermal Imagers only weigh in at 3.7 pound (1.7 kilograms) you will be able to pick this baby up and take it just about any where in the world. With its Drag and Drop capabilities you will be able to make your Excel and Word Documents much quicker. Offering 256 x 256 pixel images and full screen radiometric temperature measurements makes it best in class. This is a unique opportunity to purchase a used P640 for a fraction of the price of a new model. Rentals of this high technology gear are also available.
buy topamax 200 mg The FLIR Thermacam Ultracam scientific thermal imagers & infrared microscopes provides the very finest detail in thermal microscopy imaging. With its exceedingly rare germanium microscope lens the system can pull in and resolve elements as small as 18 microns. This is the ideal system for PCB analysis and laboratory analysis of very small components and processes. There is no other system currently available with the exact performance capabilities of this system. This is a rare opportunity to score big on a low cost Thermal Microscope system.
Maximize your investment! The system can also be used as a handheld cooled ultra sensitive infrared camera.
Supply is limited so call today.
FLIR ThermaCam SC1000/UltraCam 390 Scientific Thermal Imagers are packed with Premium Features
Easy to Operate
The SC1000/PM390/PM290/PM190 scientific thermal imagers were designed to perfectly fit in the palm of your hand, and have the keypad at the tip of your fingers for easy operation.
Auto or manual focus modes let you chose the method of thermal imaging focus that makes you most productive in a given situation.
3.0″ Color LCD Screen
FLIR Systems Inc SC1000/PM390/PM290/PM190 scientific thermal imagers feature a 3″ display screen to display the full glory of high definition thermal imaging. Integrated eyepiece is also included.
Remote Control Software
The SC1000/PM390/PM290/PM190 scientific thermal imagers come with remote control software that you can use on and desktop or laptop computer to control the SC1000.
Long Lasting Internal Battery
The SC1000/PM390/PM290/PM190 includes a built in battery that will last several hours on single charge. It will last up to 11 hours with the battery belt plugged in.
The amazing design and performance of the germanium microscope lens allows you to get in super tight on the smallest of elements. However, the ultra sensitive PtSi (platinum silicide) thermal FPA sensor inside the thermal microscope is what produces the extremely detailed fine resolution thermal images. This cooled mid wavelength thermal sensor is ultra exotic and found only in high end laboratory imagers and top of the line super long range military imaging systems. These sensors are only used when maximum imaging performance is demanded with minimum stray noise. The cooled sensors increase sensitivity from .10C common in today’s average imagers to an astounding <.07C sensitivity!
The ThermaCam Ultracam 390 Thermal Microscopy System is Unbelievable!
The amazing design and performance of the germanium microscope lens allows you to get in super tight on the smallest of elements. However, the ultra sensitive PtSi (platinum silicide) thermal FPA sensor inside the thermal microscope is what produces the extremely detailed fine resolution thermal images. This cooled mid wavelength thermal sensor is ultra exotic and found only in high end laboratory imagers and top of the line super long range military imaging systems. These sensors are only used when maximum imaging performance is demanded with minimum stray noise. The cooled sensors increase sensitivity from .10C common in today’s average scientific thermal imagers.
ThermaCam Ultracam 390 Thermal Microscopy System Demo Video
Some Images from the UltraCam 390 Scientific Thermal Imagers
SC 1000 FLIR ThermaCam Infrared Camera Images
FLIR 390 Thermal Infrared Microscope Specifications
Image Update Rate: 60hz
Video Output Format: RS-170, NTSC, S-VIDEO,CCIR
Image zoom: 2:1, 4:1
Sensitivity: Digitizing Resolution: 12 bits, 4096 levels, 72db
IR Dynamic Range: 16 bits
Detector: PtSi/CMOS FPA with variable integration
Spectral Band (Wavelength): 3.4 – 5 micron
Imaging Modes: B/W and Color
Measurement Temperatures: Spot, Auto Spot, Isotherm,Auto Area (min, max, average)
Display: Eyepiece, LCD, Video Output
Digital Image Storage: 8 or 12 bit TIFF
FLIR SC1000/ PM390/ PM290/ PM190 Infrared Camera Specifications
FOV (DEG) 16 degree lens, f/1.5 17 horizontal x 16 vertical
IFOV (MRAD) 16 degree lens 1.2
FOCUS RANGE 9′ to infinity
IMAGE UPDATE RATE 60/50 Hz
VIDEO OUTPUT FORMAT 60 Hz RS-170, NTSC, S-VIDEO
50 Hz CClR, PAL, S-VIDEO
IMAGE ZOOM 2:1 ,4:1
SENSITIVITY (NETD @ 30°C) 0.07oC
DIGITIZING RESOLUTION 12- bits, 4096 levels, 72 dB
IR DYNAMIC RANGE 16- bits
DETECTOR PtSi/CMOS 256 x 256 FPA with variable integration
SPECTRAL BAND 3.4 to 5 µm
TEMPERATURE MEASUREMENT RANGE -10 to 450°C (14 to 842°F)
EXTENDED TEMP MEASUREMENT RANGE To 1500°C (2,732°F)
ATMOSPHERIC TRANSMISSION CORR. Inputs for distance, atmospheric. temperature, and relative humidity
ACCURACY ±2% Oi 2°C
B&W and COLOR IMAGE Yes, 256 levels, 8 palettes
AUTO SPCT Yes
SPOT PEAK HOLD Yes
ISOTHERM Variable width, Multi-Co!or
PROFILE Live, On Screen
REVERSE POLARITY Yes
STANDBY MODE Yes
AUTO Temperature SPAN Yes
AUTO TEMPERATURE RANGE Yes
BACK-LIT KEYBOARD Yes
VIEWFINDER Color LCD eyepiece
EXTERNAL DISPLAY 3″ Color LCD (Optional)
PC DIGITAL STORAGE CARD Yes. 2MB to 80MB
IMAGE FILE FORMAT 8- or 12-bit TIFF
IMAGE ANALYSIS FROM PC CARD Yes
IMAGE FREEZE Yes
OPERATING TEMP. RANGE -15 to +50°C IEC 359
STORAGE TEMP. RANGE – 40 to + 70°C IEC 359
LINE VOLTAGE/FREQUENCY 95 – 250V/47 – 63 Hz
SHOCK RESILIENCE 70G IEC 68-2-6
ENCLOSURE/PROTECTION Metal case, IP54 IEC 359
SYSTEM POWER REQUIREMENTS 6VDC- 11W
DIMENSIONS & WEIGHTS
CAMERA DIMENSIONS 21cm L x 11.4 cm W x 8.9 cm H
8.3″ L x 4.5″ W x 3.5″ H
CAMERA WEIGHT 1.7 kg/3.7lb
TOTAL WEIGHT – INCLUDING BATTERY, 2.7 kg/6.1b
LENS, AND COLOR VIEWFINDER
STANDAAD CAMCORDER BATTERY 2 hr operation
OPTIONAL BATTERY BELT 11 hr operation
“Sierra Pacific Innovations is in no way related to, or affiliated with, FLIR Systems, Inc., nor is Sierra Pacific an authorized distributor of FLIR Systems, Inc. Thermography Systems. SPI is an authorized distributor for FLIR Systems Inc. Government Systems.”